- -

Añadidos recientemente

RiuNet: Repositorio Institucional de la Universidad Politécnica de Valencia

ILASS2017 - 28th European Conference on Liquid Atomization and Spray Systems: Enviados recientemente

  • thumb
    Binary cavitation in a transparent three hole GDI nozzle 
    Chaves, Humberto; Donath, Sebastian (Editorial Universitat Politècnica de València, 2017-07-28)
    [EN] A more or less real size three hole (0.1 mm diameter) transparent injection nozzle was made with 120° between the orifices and an inclination of 20° to the injector axis. The geometry is similar to that of a multi ...
  • thumb
    Spreading model for wall films generated by high-pressure sprays 
    Lamiel, Quentin; Lamarque, Nicolas; Hélie, Jérome; Legendre, Dominique (Editorial Universitat Politècnica de València, 2017-07-28)
    [EN] This paper presents a new model developed to predict the area of wall films that may develop in gasoline direct injection engines (GDI). In a always more restrictive legislation on gas emissions the injection process ...
  • thumb
    Modelling and validation of near-field Diesel spray CFD simulations based on the Σ -Y model 
    Desantes Fernández, José Mª; García Oliver, José María; Pastor, J.M.; Pandal, A.; Naud, B.; Matusik, K.; Duke, D.; Kastengren, A.; Powell, C.; Schmidt, D.P. (Editorial Universitat Politècnica de València, 2017-07-28)
    [EN] Diesel spray modelling still remains a challenge, especially in the dense near-nozzle region. This region is difficult to experimentally access and also to model due to the complex and rapid liquid and gas interaction. ...
  • thumb
    Large eddy simulations of atomisation and sprays: application to a high pressure multihole injector 
    Chausserie-Laprée, Paul; Hélie, Jérome; Chesnel, Jeremy; Demoulin, François-Xavier (Editorial Universitat Politècnica de València, 2017-07-28)
    [EN] A weak coupling strategy is proposed to simulate the pressurised spray without any empirical readjustment. Volume Of Fluid is used to simulate the nozzle internal flow with cavitation and its primary atomization into ...
  • thumb
    Spray/wall interaction analysis on an ECN single-hole injector at diesel-like conditions through Schlieren visualization 
    Payri, Raul; Gimeno, Jaime; Peraza, Jesús; Bazyn, Tim (Editorial Universitat Politècnica de València, 2017-07-28)
    [EN] To continuously improve CFD models which simulate spray evolution, breakup and evaporation mechanisms, it is helpful to validate them with results obtained by experimental research. In the present study, a mono-orifice ...