Browsing by Author "Balart Gimeno, Rafael Antonio"

"Desarrollo de nuevos materiales ecológicos basados en matrices poliméricas de origen renovable y refuerzos de alga de Posidonia Oceánica"

Ferrero Penadés, Begoña (Universitat Politècnica de València, 2017-09-04)

"Development of new ecologic materials from renewable polymer matrices and Posidonia oceanica seaweed reinforcements" The main focus of this doctoral thesis is upgrading of aquatic plant wastes from Posidonia oceanica by ...

A combination of three surface modifiers for the optimal generation and application of natural hybrid nanopigments in a biodegradable resin

Micó Vicent, Bárbara; Jordán Núñez, Jorge; Martinez Verdu, Francisco Miguel; Balart Gimeno, Rafael Antonio (Springer Verlag (Germany), 2017-01)

Our purpose was to improve the thermal, mechanical and optimal properties of an epoxy bioresin using optimum hybrid natural pigments previously synthesised in our lab. Next, we searched for the best combinations of factors ...

A comparative study on the effect of different reactive compatibilizers on injection-molded pieces of bio-based high-density polyethylene/polylactide blends

Quiles-Carrillo, Luis; Montanes, Nestor; Jorda-Vilaplana, Amparo; Balart, Rafael; Torres-Giner, S. (John Wiley & Sons, 2019-04)

[EN] The present study reports on the development of binary blends consisting of bio-based high-density polyethylene (bio-HDPE) with polylactide (PLA), in the 5¿20 wt % range, prepared by melt compounding and then shaped ...

A comparative study on the reactive compatibilization of melt-processed polyamide 1010/polylactide blends by multi-functionalized additives derived from linseed oil and petroleum

Quiles-Carrillo, Luis; Fenollar, Octavio; Balart, Rafael; Torres-Giner, S.; Rallini, M.; Dominici, F.; Torre, L. (Department of Polymer Engineering Budapest University of Technology & Economics), Scientific Society of Mechanical Engineerin, 2020-06)

[EN] This research work describes the manufacturing and characterization of novel engineering materials consisted of fully bio-based blends of polyamide 1010 (PA1010) with 20 wt% of polylactide (PLA). Four different ...

A comparison between the analytical solution of a single cantilever beam fixed at one end and the use of the finite elements method (FEM) with SolidWorks

Balart Gimeno, Rafael Antonio; Quiles Carrillo, Luis Jesús; Montañés Muñoz, Néstor (Universitat Politècnica de València, 2018-06-12)

Este objeto de aprendizaje se enmarca en el contexto de la formación de los graduados en ingeniería y se centra en el estudio comparativo de la resolución de un problema simple de cálculo de una viga mediante el método ...

A new biobased plasticizer for poly(vinyl chloride) based on epoxidized cottonseed oil

Carbonell Verdú, Alfredo; García Sanoguera, David; Jorda-Vilaplana, Amparo; Sánchez Nacher, Lourdes; Balart Gimeno, Rafael Antonio (Wiley, 2016-07-15)

[EN] The use of epoxidized cottonseed oil (ECSO) as plasticizer for poly(vinyl chloride), PVC was studied. The plasticizer content was set to 70 phr and the optimum isothermal curing conditions were studied in the temperature ...

Análisis de diagrama de tracción en materiales compuestos de matriz polimérica. Interacción fibra matriz y condiciones de isodeformación.

Balart Gimeno, Rafael Antonio; Moreno García, Virginia; Gómez Caturla, Jaume; Tejada Oliveros, Ramón; Ivorra Martínez, Juan (Universitat Politècnica de València, 2023-05-04)

Este artículo docente se centra en el análisis del comportamiento mecánico de los materiales que constituyen un lámina de material compuesto con fibra larga unidireccional. A través del artículo podrás profundizar en la ...