Accelerated mild heating of dry-cured ham by applying power ultrasound in a liquid medium

Abstract

[EN] Mild thermal treatments could be considered a feasible technique with which to improve the texture of dry-cured ham. This study explores the feasibility of using power ultrasound (PuS) to intensify heat transfer during the mild thermal treatment of dry-cured ham immersed in a liquid medium. For that purpose, a temperature controlled ultrasonic bath was used to avoid the water temperature rise due to cavitation during ultrasonic application, which could mask the actual effect of ultrasound in heat transport mechanisms. Experiments were carried out using dry-cured ham slices (thickness 2 cm), which were heated at different temperatures (40, 45, 50 degrees C) with (PuS) and without (conventional mechanical stirring, CV) ultrasonic assistance. Temperature was monitored in the two main muscles of the ham (Biceps lemons and Semimembranosus) and in different positions of the slice. A model that considered heat transfer entirely controlled by conduction was chosen for describing heating kinetics and quantify the influence of temperature and ultrasonic application in the apparent thermal diffusivity.

The heat conduction model proposed was adequate to describe both CV and PuS heating kinetics (VAR > 98.6%). Ultrasound application sped up the heat transfer by increasing the apparent thermal diffusivity up to 51%, but the higher the temperature, the lower the ultrasonic intensification. The apparent thermal diffusivities identified for the slices were satisfactorily validated (VAR > 98.4%) in independent experiments with ham cylinders. Therefore, PuS could be considered as an effective technology for the purposes of accelerating the heat transfer, thus shortening the heating time of dry-cured ham slices immersed in a liquid medium.